- How to reset gpedit.msc values to default windows xp. Goto Run type; C. Windows installer does not permit installation from a remote desktop Cause: This is.
- It is possible to install gpedit.msc snap-in for MMC in Windows XP Home Edition. I found the list of necessary files on pagesperso-orange.fr (in French), which also had the archive of all the necessary (again, French) files and the installation batch-file.
- Here is how you block the installation of drivers for specific devices based on the device's hardware ID: Tap on the Windows-key, type gpedit.msc, and hit the Enter-key. This opens the Group Policy Editor on Windows. Go to Computer Configuration Administrative Templates System Device Installation Device Installation Restrictions.
- Download Gpedit Installer Windows 10
- Install Gpedit Msc Windows Xp Installer
- Download Gpedit For Windows 10 Home Edition
- How To Use Gpedit In Windows 10
- Install Gpedit Msc Windows Xp Sp3
- Install Gpedit Msc Windows Xp 64-bit
- Microsoft Download Gpedit Windows 10
Gpedit.dll Explanationlink
The Domain Controller or in the local Group Policy Windows XP Home does not include GPEDIT; XP Home users can apparently run this program if they have access to files from an XP Pro. Copy the files gpedit.dll and fde.dll from WINDOWSSystem32 on the XP Pro machine to WINDOWSSystem32 on the XP Home machine.
The Gpedit.dll file is 0.2 MB. The download links for this file are clean and no user has given any negative feedback. From the time it was offered for download, it has been downloaded 15755 times and it has received 4.7 out of 5 stars.
Table of Contents
- Methods for Solving Gpedit.dll
- Method 5: Fixing the Gpedit.dll Errors by Manually Updating Windows
Operating Systems Compatible with the Gpedit.dll Filelink
All Versions of the Gpedit.dll Filelink
The last version of the Gpedit.dll file is the 5.1.2600.2180 version.This dll file only has one version. There is no other version that can be downloaded.
- 5.1.2600.2180 - 32 Bit (x86)Download directly this version
Steps to Download the Gpedit.dll Filelink
- First, click on the green-colored 'Download' button in the top left section of this page (The button that is marked in the picture).
- After clicking the 'Download' button at the top of the page, the 'Downloading' page will open up and the download process will begin. Definitely do not close this page until the download begins. Our site will connect you to the closest DLL Downloader.com download server in order to offer you the fastest downloading performance. Connecting you to the server can take a few seconds.
Methods for Solving Gpedit.dlllink
ATTENTION! Before starting the installation, the Gpedit.dll file needs to be downloaded. If you have not downloaded it, download the file before continuing with the installation steps. If you don't know how to download it, you can immediately browse the dll download guide above.
Method 1: Copying the Gpedit.dll File to the Windows System Folderlink
- The file you downloaded is a compressed file with the '.zip' extension. In order to install it, first, double-click the '.zip' file and open the file. You will see the file named 'Gpedit.dll' in the window that opens up. This is the file you need to install. Drag this file to the desktop with your mouse's left button.
- Copy the 'Gpedit.dll' file file you extracted.
- Paste the dll file you copied into the 'C:WindowsSystem32' folder.
- If you are using a 64 Bit operating system, copy the 'Gpedit.dll' file and paste it into the 'C:WindowssysWOW64' as well.
NOTE! On Windows operating systems with 64 Bit architecture, the dll file must be in both the 'sysWOW64' folder as well as the 'System32' folder. In other words, you must copy the 'Gpedit.dll' file into both folders.
- In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
- Open the Start Menu and before clicking anywhere, type 'cmd' on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in 'cmd' to bring up the Command Prompt.
- Right-click the 'Command Prompt' search result that comes up and click the Run as administrator' option.
- Let's copy the command below and paste it in the Command Line that comes up, then let's press Enter. This command deletes the Gpedit.dll file's problematic registry in the Windows Registry Editor(The file that we copied to the System32 folder does not perform any action with the file, it just deletes the registry in the Windows Registry Editor. The file that we pasted into the System32 folder will not be damaged).
%windir%System32regsvr32.exe /u Gpedit.dll
- If you are using a 64 Bit operating system, after doing the commands above, you also need to run the command below. With this command, we will also delete the Gpedit.dll file's damaged registry for 64 Bit (The deleting process will be only for the registries in Regedit. In other words, the dll file you pasted into the SysWoW64 folder will not be damaged at all).
%windir%SysWoW64regsvr32.exe /u Gpedit.dll
- We need to make a clean registry for the dll file's registry that we deleted from Regedit (Windows Registry Editor). In order to accomplish this, copy and paste the command below into the Command Line and press Enter key.
%windir%System32regsvr32.exe /i Gpedit.dll
- If you are using a 64 Bit operating system, after running the command above, you also need to run the command below. With this command, we will have added a new file in place of the damaged Gpedit.dll file that we deleted.
%windir%SysWoW64regsvr32.exe /i Gpedit.dll
- If you did all the processes correctly, the missing dll file will have been installed. You may have made some mistakes when running the Command Line processes. Generally, these errors will not prevent the Gpedit.dll file from being installed. In other words, the installation will be completed, but it may give an error due to some incompatibility issues. You can try running the program that was giving you this dll file error after restarting your computer. If you are still getting the dll file error when running the program, please try the 2nd method.
Method 2: Copying the Gpedit.dll File to the Software File Folderlink
- In order to install the dll file, you need to find the file folder for the software that was giving you errors such as 'Gpedit.dll is missing', 'Gpedit.dll not found' or similar error messages. In order to do that, Right-click the software's shortcut and click the Properties item in the right-click menu that appears.
- Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
- Copy the Gpedit.dll file into the folder we opened.
- The installation is complete. Run the software that is giving you the error. If the error is continuing, you may benefit from trying the 3rd Method as an alternative.
Method 3: Uninstalling and Reinstalling the Software That Is Giving the Gpedit.dll Errorlink
- Push the 'Windows' + 'R' keys at the same time to open the Run window. Type the command below into the Run window that opens up and hit Enter. This process will open the 'Programs and Features' window.
appwiz.cpl
- On the Programs and Features screen that will come up, you will see the list of softwares on your computer. Find the software that gives you the dll error and with your mouse right-click it. The right-click menu will open. Click the 'Uninstall' option in this menu to start the uninstall process.
- You will see a 'Do you want to uninstall this software?' confirmation window. Confirm the process and wait for the software to be completely uninstalled. The uninstall process can take some time. This time will change according to your computer's performance and the size of the software. After the software is uninstalled, restart your computer.
- After restarting your computer, reinstall the software that was giving the error.
- You can solve the error you are expericing with this method. If the dll error is continuing in spite of the solution methods you are using, the source of the problem is the Windows operating system. In order to solve dll errors in Windows you will need to complete the 4th Method and the 5th Method in the list.
Method 4: Solving the Gpedit.dll error with the Windows System File Checkerlink
- In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
- Open the Start Menu and before clicking anywhere, type 'cmd' on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in 'cmd' to bring up the Command Prompt.
- Right-click the 'Command Prompt' search result that comes up and click the Run as administrator' option.
- Paste the command in the line below into the Command Line that opens up and press Enter key.
sfc /scannow
- The scan and repair process can take some time depending on your hardware and amount of system errors. Wait for the process to complete. After the repair process finishes, try running the software that is giving you're the error.
Method 5: Fixing the Gpedit.dll Errors by Manually Updating Windowslink
Some softwares need updated dll files. When your operating system is not updated, it cannot fulfill this need. In some situations, updating your operating system can solve the dll errors you are experiencing.
In order to check the update status of your operating system and, if available, to install the latest update packs, we need to begin this process manually.
Depending on which Windows version you use, manual update processes are different. Because of this, we have prepared a special article for each Windows version. You can get our articles relating to the manual update of the Windows version you use from the links below.
Explanations on Updating Windows Manuallylink
Most Seen Gpedit.dll Errorslink
When the Gpedit.dll file is damaged or missing, the softwares that use this dll file will give an error. Not only external softwares, but also basic Windows softwares and tools use dll files. Because of this, when you try to use basic Windows softwares and tools (For example, when you open Internet Explorer or Windows Media Player), you may come across errors. We have listed the most common Gpedit.dll errors below.
You will get rid of the errors listed below when you download the Gpedit.dll file from DLL Downloader.com and follow the steps we explained above.
- 'Gpedit.dll not found.' error
- 'The file Gpedit.dll is missing.' error
- 'Gpedit.dll access violation.' error
- 'Cannot register Gpedit.dll.' error
- 'Cannot find Gpedit.dll.' error
- 'This application failed to start because Gpedit.dll was not found. Re-installing the application may fix this problem.' error
Other Dll Files Used with Gpedit.dlllink
Incoming Feedback for the Gpedit.dll Filelink
The graph below has been put together according to the feedback given by our users. By looking at this graph, you can see the usefulness of the Gpedit.dll file. If you also want to give your opinion, you can give feedback by using the stars in the upper section of this page.
The Location on our Site of the Gpedit.dll Filelink
- Windows 10
- Windows 8.1
- Windows 8
- Windows 7
- Windows Vista
- Windows XP
It is possible to install gpedit.msc snap-in for MMC in Windows XP Home Edition. I found the list of necessary files on pagesperso-orange.fr (in French), which also had the archive of all the necessary (again, French) files and the installation batch-file.
Warning: you proceed at your own risk. If you do not know what you are doing – please don’t
Download (original) French gpedit-pour-xp-home.zip.
Download English gpedit for windows xp home.zip (also in 7zip archive).
Here are instructions for manual MMC snap-in installation. Original French-version archive had a batch file which does installation automatically, which I also added to the English archive (gpedinst.bat). But you must manually verify that batch file fits your system before running it! It might be safer to follow the instructions manually.
- Put these files:
appmgmts.dll
appmgr.dll
fde.dll
fdeploy.dll
gpedit.msc
gpedit.dll
gptext.dllinto %SystemRoot%system32 folder (most often it’s just c:windowssystem32)
- put these files:
system.adm
inetres.adm
conf.adminto %SystemRoot%system32GroupPolicyADM (create if this folder doesn’t exist)
- finally, run these commands one by one in the CMD window:
regsvr32 gpedit.dll
regsvr32 fde.dll
regsvr32 gptext.dll
regsvr32 appmgr.dll
regsvr32 fdeploy.dll
That should make gpedit.msc callable as Start -> Run -> gpedit.msc.
Other language versions of the necessary files can be retrieved from corresponding-language installations of WinXP Professional; English version can also be downloaded directly from Microsoft website ( e.g. here , or search for “Group Policy ADM Files” at microsoft.com). Also, you can extract necessary files from available Windows distributions: just don’t forget, that “filename.dl_” is a compressed version of “filename.dll”, and can be uncompressed by using XP-bundled extract command.
See also this comment for alternative gpedit installation (get the file from badongo first), and also this comment for one more explanation of manual installation.
Geeks corner:
- a comprehensive list of the “Group Policy/User Configuration/Administrative Templates” settings in Windows XP Home Edition
- an extremely comprehensive Excel sheet, which maps numerous *.adm-file options to their registry equivalents – Group Policy Settings Reference (PolicySettings.xls). This file is for Windows 2000, Windows XP, and Windows 2003
Disclaimer: I do not know if modifying (e.g. by adding gpedit) your WinXP HE is a violation of any EULAs. It’s your own responsibility to check this out and comply with any such regulations. Also, be advised that modifying any settings using gpedit.msc on WinXP HE may render some parts of the OS inoperable (in my opinion). You have been warned!
This entry was posted on Thursday, November 15th, 2007 at 18:03 and is filed under how-to, Links, Notepad, Software.You can follow any responses to this entry through the RSS 2.0 feed.You can skip to the end and leave a response. Pinging is currently not allowed.How to remove new folder exe or regsvr exe or autorun inf virus | am i works? Says:April 1st, 2008 at 19:15
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these [...]
» How to remove new folder exe or regsvr exe or autorun inf virus My Marketing Secrets: All about marketing,advertising,trading,seo,ppc Says:May 6th, 2008 at 9:51
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these [...]
uma Says:June 7th, 2008 at 8:22
i am sufferring from newfolder.exe and regsvr.exe please give me suggestion how to clean
Bogdan Says:June 7th, 2008 at 8:45
Uma,
you’ll need to search for the solution.
I’ve seen several solutions referring to this page, but this page itself is for the installation of Group Policy Editor in WinXP HE, not for fixing the “newfolder.exe” problem.
AntivirusExpert Says:June 28th, 2008 at 8:12
I was looking for a way to enable gpedit.msc in XP Home because I want to help out a person suffering from Antivirus XP 2008 which screwed up the desktop settings. Will try this trick with gpedit files as suggested. Thanks for sharing!
yp_taiwan Says:July 6th, 2008 at 5:08
I got the info from this Chinese site, tried, and it worked: http://www.jpopforum.net/thread-239144-1-1.html. I backuped before trying that, though. Here is the download site from badongo: http://www.badongo.com/file/3600457. The README.TXT is in Chinese and I’m translating now. Will post later.
yp_taiwan Says:July 6th, 2008 at 5:23
Basically, the files you download from the above badongo site copy files from XP Pro to XP HOME. Here are the steps:
1. Download files from http://www.badongo.com/file/3600457.
2. You’ll see 15 files including gpedit.bat and README.TXT, etc. Double click the gpedit.bat. You’ll be prompted RegSvr32 saying xxx.dll worked/registered successfully (in Chinese), click OK. Then it’s done.
3. Go to START > RUN and type gpedit.msc and see.
For those who do not want to run this gpedit.bat, I suggest you do the following steps manually (get a XP Pro installation CD first).
************************************************
Translation of README.TXT
************************************************
This gpedit.bat does the following:
1. Copies these files : gpedit.msc、fde.dll、gpedit.dll、gptext.dll、wsecedit.dll from“C:WINDOWSsystem32”of XP
Professional to this directory of XP HOME:“C:WINDOWSsystem32”.
2. In START>RUN, run thiese commands:“regsvr32 fde.dll”,“regsvr32 gpedit.dll”,“regsvr32 gptext.dll”,“regsvr32 wsecedit.dll.
3. Replace *.adm of XP Professional from its“C:WINDOWSINF”to“C:WINDOWSINF” of HOME.
4. Lastly, in SRART>RUN, run “gpedit.msc”.
>>> Obtained info from http://www.jpopforum.net posted by ryan17172003 2007/11/11 <<< thanks.
ryan17172003
July 6th, 2008 at 7:39
yp_taiwan,
didn’t instructions in my post work for you?…
anyway, thanks for the additional source (and translation) for desperate WinXP HE owners
Tim Says:July 17th, 2008 at 0:41
I have successfully copied all of the necessary files but when I run regsrv32, the DllRegisterServer fails as below.
The only dll that registers is pgtext
appmgmnts – dll loaded but regservr entry point not found
appmgr, fde – error 0x800703fb
fdeploy, gpedit – error 0×80040201
Download Gpedit Installer Windows 10
Any clues?
Bogdan Says:July 17th, 2008 at 1:47
Tim,
“copied all” – from the install disk? if yes – did you first “extract” the dlls, or just renamed them (changing last underscore to “l”)?
other than that – maybe you already have those dlls on your system? I can’t lookup error descriptions for the error codes you provided – sorry, so it’s only my guesswork.
How To Install Group Policy Editor | am i works? Says:July 26th, 2008 at 8:23
[...] As I had already mentioned in my first newfolder.exe virus removal article you can download the french version of gpedit.msc from bogdan.org.ua. [...]
rashmi Says:July 28th, 2008 at 15:37
i am havin vista home premium can it be installed in my PC, even my PC is suffering from antivirus XP 2008
cuxzs Says:July 31st, 2008 at 17:14
that work but not support with WIN HE.
kenny Says:August 20th, 2008 at 8:07
well…. i tried the manual way, and tried to batch file in chinese….however i continuously get the error message saying that
“the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient rights to the file.”
i have sufficient rights, the file is there, and in the properties dialogue box of the gpedit.msc file it describes the file as being an MMC console file and i am using an Administrator account and even checked to make sure that the file was not read-only.
so as far as having an updated version of the gpedit.msc….i dunno….
Bogdan Says:August 20th, 2008 at 10:39
Kenny,
did you try opening that gpedit.msc directly via mmc? (that is, launch MMC, File->Open and find gpedit.msc).
Try to re-download that single gpedit.msc file, and check if you have latest updates to your WinXP HE.
kenny Says:August 20th, 2008 at 21:40
no, i did not try that.
but also, now i am having more problems.
now that i tried installing the gpedit for winxp he, now my search assistant has been damaged (or so it says), i cant play one of my favorite games, Gunz. It gives me a runtime error, saying that this application has requeswted the runtime terminate in an unusual way (im not sure if it is just the game or if the gpedit thing messed it up, but it happened after i tried instaling gpedit)
coencramer Says:August 21st, 2008 at 3:33
eng version
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1296403157612+28353475&threadId=1154077
kenny Says:August 21st, 2008 at 5:12
i tried installing that version just now. ….it gives the same results.
i wouldnt mind just reversing all of this….but i had system restore turned off….and now i cant turn system restore back on because it keeps giving me errors….
kenny Says:September 6th, 2008 at 18:32
that just redirected me to this page…. that was completely useless
Bogdan Says:September 7th, 2008 at 10:24
Kenny,
I strongly suspect that your problems are due to a malware/virus activities and not the gpedit.msc installation.
However, it is quite simple to reverse changes. Important: I didn’t try that! (consider this a disclaimer)
To “unregister” all the DLLs registered, do this:
regsvr32 /u gpedit.dll
regsvr32 /u fde.dll
regsvr32 /u gptext.dll
regsvr32 /u appmgr.dll
regsvr32 /u fdeploy.dll
After this, you can (optionally) remove
system.adm
inetres.adm
conf.adm
from %SystemRoot%system32GroupPolicyAdm
Finally, you might want to clean up your system (optionally) by removing
appmgmts.dll
appmgr.dll
fde.dll
fdeploy.dll
gpedit.msc
gpedit.dll
gptext.dll
from windowssystem32 folder.
These steps effectively reverse the changes introduced by the gpedit.msc installation.
However, some of the removed files might be needed by the system, and if you delete them it might complain about missing files or just malfunction in some aspects. So make a backup and be sure you can use it.
Finally, I do not believe this will solve your problems – as I said at the beginning, it’s likely that malware/viruses found home on your PC.
kenny Says:September 11th, 2008 at 15:19
Bogdan,
thank you for your time in attempting to help me, however, i have already tried this. Also, i know for a fact that my computer is clean, as i monitor malware activity very closely with multiple programs and observances, so im not worried about malware at all.
unregistering the files and delting them did me no good.
In resolution, my game did end up begin working again after the makers made an update….so it could have been a problem on my part AND their part.
the only thing that is not working currently is the help assistant….which i use to clean my computer, but it isnt a huge problem, and i dont have a windows recovery disc, so i have given up on that. I need a new computer anyays, as everything is failing on it, and it would be more cost efficient to just buy a new one.
unlockgoogle Says:September 17th, 2008 at 6:45
newfolder.exe….solution…here>>>>
run>gpedit.msc
administrative templates > system >disable registry editing tool
^^^next…
run>msconfig
start up tab …..remove regsvr.exe>dont restart comp…
^^^next…
control panel..>Scheduled Tasks..>remove other than “add Scheduled Task”
^^^next…
search in your system…regsvr.exe and newfolder.exe..all folder.exe files…file size is nearly 603kb….delete all…
****dont delete other exe files…
****dont delete regsvr32.exe files…
^^^^^next….
search regsvr.exe in regedit….
delete all…
**** dont delete regsvr32.exe files…
***do yourown risk…this procedure have given good result to me….>>>
http://www.unlockgoogle.blogspot.com
mark Says:September 23rd, 2008 at 18:22
I am trying to use the gpedit to tweak the bandwidth limits on XP Home. Any idea on how I can follow the menu tree below in the French version?
“Follow this path: Local Computer Policy>Computer Configuration>Administrative Templates>Network>QoS Packet Scheduler>Limit Reservable Bandwidth>. If it’s disabled or not configured, change the settings like the one below:”
Thanks for the help
Bogdan Says:September 23rd, 2008 at 23:46
Mark,
if you had given a link to a screenshot, I would try guessing (my French knowledge is basic).
…or just try guessing yourself – that’s pretty easy, believe me – lots of common word parts.
…or grab English equivalents of the files you used, to get the texts “translated”.
swiss420 Says:October 1st, 2008 at 23:20
I tried the above instructions and it “worked”. Meaning I can open over the mmc the gpedit.msc and have all the adm Templates load. What’s not working is the “Richtlinienergenissatz” (Sorry for the German dont know how its called in English anymore) Where you can see which policies applies to the system. Anyway when you generate a report it comes up with a error message “illegal namespace” So that still does not work and also does not look promising that any Settings will have an effect on the OS. Thats just my five Cents on the Topic. Here is how I copied the files. Would love to hear from anyone that was able to configure anything with the gpedit.msc under XP Home.
I copied the files from another XP Pro and wrote a little batch file to make the process a little faster for other XP Home Computers. Here is the Batch file. You might have to change the Folder Path to represent your installation. And remember you will have to add any Backup needs yourself. Just a reminder! Now even though it works it might not give you the functionality you search for. Windows XP Home is a cripled Operating System and gpedit works with Templates (*.adm) Files. Meaning that even though its offered to configure under the newly added gpedit it does not mean your underlaying Operating system supports it. I was searching for Remote WMI Support which I guess is not available.
@echo off
copy gpedit.dll C:WINDOWSSystem32gpedit.dll
copy fde.dll C:WINDOWSSystem32fde.dll
copy gptext.dll C:WINDOWSSystem32gptext.dll
copy appmgr.dll C:WINDOWSSystem32appmgr.dll
copy fdeploy.dll C:WINDOWSSystem32fdeploy.dll
pause
copy system.adm C:windowssystem32GroupPolicyAdmsystem.adm
copy inetres.adm C:windowssystem32GroupPolicyAdminetres.adm
copy conf.adm C:windowssystem32GroupPolicyAdmconf.adm
pause
regsvr32 C:WINDOWSSystem32gpedit.dll
regsvr32 C:WINDOWSSystem32fde.dll
regsvr32 C:WINDOWSSystem32gptext.dll
regsvr32 C:WINDOWSSystem32appmgr.dll
regsvr32 C:WINDOWSSystem32fdeploy.dll
pause
October 1st, 2008 at 23:39
Swiss420,
thanks for the feedback.
I’ve included the original French batch file into English version – it does the same as yours.
joven Says:November 14th, 2008 at 8:30
Sir:
WHEN I RUN GPEDIT IN MY RUN COMMOND THE COMMENT IS ACCESS IS DENIED I TRY UR STEP BUT THEN NOT HAPPEN,ITS ONLY THESAME THAT THE ACCESS DENIED..PLS HELP ME OR MAIL TO ME..jovskie2004@yahoo.com
thanks for immediately response..
kotenk Says:January 21st, 2009 at 18:42
u’re such a genius. thanks 4 saving my life!!! i need gpedit badly
gary Says:January 27th, 2009 at 1:52
ok i followed all the instructions for the gpedit.msc and it works but QOS packet schedule is missing what can i do to get that?
Bogdan Says:Install Gpedit Msc Windows Xp Installer
January 27th, 2009 at 2:11
Gary,
I cannot help with that, sorry.
It might be missing just because it is Home Edition and not Professional edition.
gpedit is only an interface to the registry – it does not add any functionality itself.
gary Says:January 27th, 2009 at 2:17
ok thanks Bogdan
Daniel Cirlugea Says:February 27th, 2009 at 18:00
It works great ! Thanks !!
How to remove autorun.inf; newfolder.exe or regsvr.exe viruses | Virus Medicine Says:March 13th, 2009 at 5:36
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these [...]
Virus Attack - Remedy « My Opinions Says:March 14th, 2009 at 19:52
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these [...]
jace Says:March 24th, 2009 at 6:33
u rock
gunawan Says:March 27th, 2009 at 15:46
hi all,
thx for sharing, i am newbie here and i’am very interested with posting in this website. i already tried the methods and it’s working very good, all the admin template loaded successfully to my xp home computer.
but the problem appears when i tries to set some user policy i.e no control panel or no display setting. i still seeing and accessing my control panel and my display setting after i set the user policy at gpedit.msc and reboot my computer.
what’s wrong???
pleazzzeeee help me out here.
thx
beberu
March 27th, 2009 at 19:09
@Gunawan – “gpedit is only an interface to the registry – it does not add any functionality itself”.
gunawan Says:March 28th, 2009 at 2:35
is this mean that the policy setting for my xp home won’t change if i use gpedit.msc? i must directly change my registry?
please inform what should i do to add it’s functionality at my xp home computer?
March 28th, 2009 at 18:19
using registry won’t help if the required functionality is missing from XP HE.
Adding some functionality to HE from Pro should be possible, but I’m not a specialist in that. And that definitely violates the MS EULA
Alex Says:April 14th, 2009 at 15:45
I did what the article says but, as gunawan said, when I try to prohibit access to Control Panel I still see it. It looks like gpedit.msc for XP Home is useless (at least for me).
CARLO Says:April 21st, 2009 at 16:31
DUDE ! THIS WORKED ! TNK YOU !!!!! I LOVE YOU MAN !
Joey Says: April 24th, 2009 at 14:41
worked great thanks!
Kathy Says:May 7th, 2009 at 4:29
Thank You So Much!!!
This helped me a lot. Now I can finally have System Restore on my computer!
Hari Says:June 9th, 2009 at 22:02
When i type regsvr32 gpedit.dll
it says
Load library(“gpedit.dll”)failed- The specified module could not be found
I need help as soon as possibe
thank you
Bogdan Says:June 9th, 2009 at 22:47
Help is coming, hang on!
Do you run ‘regsvr32 gpedit.dll’ from the folder/path which actually has that file? (I mean ‘gpedit.dll’)
If not – first ‘cd’ into the directory which has that file, then run the command again.
If yes: get new ‘gpedit.dll’, it might have been corrupted during download.
Bonow Says:July 15th, 2009 at 12:55
WORKED!! 100%!
Thx Man!!
BTW what’s that MS-DOS “GpedInst” batch file for??
Bogdan Says:July 15th, 2009 at 16:01
That batch file is supposed to do all the described manual operations automatically.
It has been a long time, so I’m not sure it really does that, though.
Paulo Cyrus Says:July 18th, 2009 at 3:19
Whew, everything worked on my laptop and my internet is so fast! Thanks to everyone here! I learned a lot from you guys! I followed the instructions manually. I’m thinking twice about gpedinst.bat, might give me more problems. Anyway, hope the others resolve their problems with this forum! So, very helpful!
Bonow Says:July 20th, 2009 at 12:17
Oo Man…
I Can’t find ‘QOS internet setting’ through gpedit.msc
Can someone help me, on how to make faster internet through gpedit.msc?
Paulo Cyrus Says:July 27th, 2009 at 17:54
To Bonow,
On the number 24th comment here what mark said is how you can find the QoS packet scheduler. If the packet scheduler is disabled, enable it and change the bandwidth to zero. I’ve read some other forums that “I think” if you can’t find the the QoS packet scheduler, you need to download it then voila! Hope this helps. Peace!
Cognoscis » Blog Archive » Newfolder.exe virus Says:July 28th, 2009 at 6:24
[...] gpedit part. If yours is XP home, then you will have to download and install it. You can do it from here. Once done follow these [...]
j Says:August 8th, 2009 at 18:01
it works!
San Diego Web Design Says:August 13th, 2009 at 14:37
It worked for Windows XP Home! Thanks a lot.
Hery Says:September 8th, 2009 at 6:26
GREAT!!!it works. Thanks a lot…
Katikih Says:September 23rd, 2009 at 5:11
It works Thanks
chewping Says:September 23rd, 2009 at 12:24
i have 2 desktops (both run on Win XP Home Edi) and i did the same thing to both, however only one desktop works (manage to open the group policy window), but the other desktop shows me this message: Access is denied
someone told me that i have to be the administrator, but the thing is, i am the ONE & ONLY user on both desktops! could anyone provide some solution? Thanks
regards,
chewping
December 24th, 2009 at 9:47
Gr8 tip thanks…
Alex Says:February 4th, 2010 at 11:30
so sick man, thanks
salim Says:July 26th, 2010 at 22:11
wowowowoowowow!!!!!! tysm!! ty! helped me soo much!
Michael Says:July 27th, 2010 at 21:49
Thank you very very very much!!!
This worked for me perfectly. It’s an enormous help to me!
Cedric Says:August 25th, 2010 at 2:39
thanks for this sir..my gpedit is back
yp_taiwan Says:August 27th, 2010 at 17:21
To: Floor 8 Bogdan
>yp_taiwan,
>didn’t instructions in my post work for you?…
>anyway, thanks for the additional source (and translation) for desperate WinXP HE owners
Unfortunately no. I suppose that’s because I’m using Chinese OS? Thanks a lot anyway.
Boim Says:August 27th, 2010 at 19:44
Thanks for the information you have provided.
Thanks to the information you provide on this site I could on the open gpedit.msc from the run command. But there’s a little awkwardness, in the windows group policy settings, I can not find security settings when sy already copying all the files above. Need I inform you that sy copy those files from windows pro to my use of the Windows Home Edition. Is there something missing? I do not feel that way.
September 1st, 2010 at 17:53
Don’t understand, you have realyt tested it?
I m trying differant version since 2 day, it add gpedit interface but all rule i set d’ont apply and i don’t see any change in registery.
No one have thi problems?
Burner Says:Download Gpedit For Windows 10 Home Edition
September 3rd, 2010 at 2:17Great thread here and it works for my. Thanks to everyone
With the Chinese version was anyone able to replace all the text with a English version file?
Karina Says:September 27th, 2010 at 0:51
Thanks It worked!
daryl Says:October 3rd, 2010 at 10:23
hello,
When i try to run cmd on my loptop it was automatically shutdown, i’m using xp home edition. can someone help me? thanks
Martin Says:October 9th, 2010 at 2:25
Hi,
Firstly thanks, this works great on XP Home. Will it also work on Windows 7 Home Premium?
Bogdan Says:October 9th, 2010 at 9:26
I have no idea about Windows 7 Home Premium, I haven’t yet used Windows 7 at all.
I even didn’t know it has the same limitation as WinXP Home Edition
Nupo Says:October 31st, 2010 at 20:23
Something is still missing from this solution. Local security settings will not be included in Group Policy.
bruce Says:November 7th, 2010 at 17:09
this worked like a charm.
Josh Says:November 26th, 2010 at 21:25
Thank You very much, for the cimple walkthrough
I can finally add log-on / log-off Scripts
Thanks
Josh
December 1st, 2010 at 9:10
downloaded the English files; installed it; had to restart my computer a few times to work good. But so far so good.
Thanks for all this information
L.
mani Says:December 11th, 2010 at 16:23
I have installed as per the instruction in xp home and successfuly installed. I can edit enable and disable in the group policy but it is not reflected in the system.
Yakup Says:January 31st, 2011 at 20:33
hello, i read lots of things and i have gpedit face, but changes can not be applied. For example, i check the box to make control panel unreachable, it seems so but i can reach the conrtol panel, so it doesnt work even you have its face like running
Eric Says:February 9th, 2011 at 0:33
Hello,
I had to create the files, grouppolicy/ADM, I put allthe files downloaded into their spots! There are still 2 files left in the download, gpedInst, and gpedit.. There was NO file named gpedit.msc in the download??
what next?
Thanx for your time!!!
E…….
pepeng dulas Says:February 21st, 2011 at 3:49
works fine with my emachine netbook,i can control now my desktop,home xp edition,thanks alot!!!!
Prateek Says:February 25th, 2011 at 17:12
I never thought that its possible to add gpedit in XP Home.
ThankS a ton
Sijil Says:March 15th, 2011 at 11:36
i have installed gpedit.msc in my xp home edition and is working fine.. thanks dude..
atd powers Says:March 18th, 2011 at 22:01
work like a charm no problems even added to my xp pro was missing files and ran the way you said it would run.
santanna Says:April 26th, 2011 at 5:03
Thanks. Very good!
Benton Says:September 14th, 2011 at 17:47
This is just the detail I was trying to find. I wish I’d have found your blog sooner.
Remove New Folder.exe virus and gain Access Back to task Manager, Folder Option, Regedit Back….. « SACHIN JINDAL'S BLOG Says:November 6th, 2011 at 16:44
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these steps. 2. Go to user’s configuration> Administrative [...]
Melvina Says:November 11th, 2011 at 9:30
It works…horray..!!! thanks a lot ^3^
Virus Folder Says:December 3rd, 2011 at 6:41
[...] XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.mscand then follow these [...]
Lauren Says:January 17th, 2012 at 1:10
Thank you so much, it has allowed me to get faster internet speeds.
Your a life saver
January 20th, 2012 at 6:36
I did it as you have said. I change policy in gpedit.msc, the changes are in the Registry.pol file. But the changed policy is not applyed. It is not at the registry. I tryed gpupdate, but it wrote can’t found file….Why? What must I do to apply policy?
AnonyHow To Use Gpedit In Windows 10
Says:January 30th, 2012 at 2:57
If you get this kinda error with any file, When i type regsvr32 gpedit.dll
it says
Load library(“gpedit.dll”)failed- The specified module could not be found, its probably because you forgot to copy gptext.dll, gpedit.dll, or gpedit.msc into system32 folder– same thing with any other file, you have to copy all of the files make sure not to miss any- like he says above…
Admin tips « My Blog Says:Install Gpedit Msc Windows Xp Sp3
February 15th, 2012 at 5:39
[...] Click Start -> Run, type gpedit.msc (need to get and install the following for Windows XP [...]
nurfaisyah Says:Install Gpedit Msc Windows Xp 64-bit
June 9th, 2012 at 14:43it’s work for me….so thanks for tutorial
azamar Says:November 8th, 2013 at 12:25
INSTALED correctly but NOTHING IMPROVED neigther 1% !
Regards from Athens Greece
Leave a Reply
Microsoft Download Gpedit Windows 10
« Ukrainian web-portal bigmir.net switched from own free email service to gmailGoogle’s services are language-dependent »